I’ve been running into issues with joint alignment when welding pipe for a recent job. I’m using a Miller Multimatic and often find that slight misalignments cause problems in the final inspection. Any tips on ensuring precision during setup or techniques that have worked for you would be greatly appreciated.
, I totally get the alignment struggle! When I was using my Multimatic, I started clamping the pipes in place before tacking them. It helped a lot with those pesky misalignments.
One thing I found really helpful is using a laser level to check the alignment before tacking. It’s like using a GPS for your pipes — no more getting lost in misalignment! Just make sure to double-check your setup after moving things around.
I’ve had luck using a chain clamp to line up the pipes — it holds everything in place really well. And I agree, double-checking your setup is key, especially after shifting things around. Have you tried using a welding square for those corners? It can really help keep things aligned.